IC-F60V UHF Commercial 128 Ch. Handheld 2-Way Radio
miss important calls with loud audio, vibration alert
and voice recorder!
Police. Security. Oil industry. Public utilities. Each profession
experiences its own unique challenges, but all have one thing
in common: the need of reliable communications. Icoms
IC-F60V offers a compact waterproof, MIL STD package, thats
easy to use. Rain or shine, this radio keeps you in contact
in nearly any environment.
a pre-programmed 2-tone/5-tone code or call from a specific
user (MDC mode only) is received, the radio vibrates powerfully
enough to be felt through heavy clothing.
minute voice recorder
When a pre-programmed 2-tone/5-tone code or a SelCall (MDC
mode only) is received, the voice recorder automatically starts
recording the incoming message. You will not miss an important
call even when you are temporarily away from the radio. You
can manually start recording incoming calls and also your
own message. It records up to a maximum of 8 minutes (Or up
to 48 calls of 10 sec. recording time).
The IC-F60V delivers a loud 700mW* audio output with the built-in
BTL amp. The built-in audio compander provides clear, low
noise communications. Improved bass characteristics also betters
the audio quality.
* Typical with internal speaker.
worker function for remote check in
When the radio is not operated for a preset period (1 to 255
min.), the radio sounds a beep and requires you to push the
emergency button. If the emergency button is not pushed for
a preset time (1 to 255 sec.), an emergency signal automatically
transmits and informs your co-worker or dispatcher that something
may have happened to the individual worker.
dust-tight and waterproof protection
The IC-F60V has outstanding protection against dust and water
that is equivalent to IP67. The IC-F60V can withstand submersion
in 1m depth of water for up to 30 minutes and has dust-tight
construction that prevents the ingress of dust.
popular signalings built-in
Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone and MDC signaling
capabilities to set up your talk group or selective calling.
The IC-F60V can decode ten 2-Tone codes or eight 5- Tone codes
on a channel. When a matched tone is received, the following
actions are programmable for each code.
Answer back call
MDC 1200 Compatible
The following selective calling and ANI features are available
with the built-in MDC signaling.
Emergency, emergency mic monitoring
Mode dependent scan
In the mode dependent setting, the scanning setting is dependent
on the operating channel. When you change the operating channel,
the scanning list automatically changes to the operating channel
setting. It is convenient when you move to a different operating
area and change an operating channel, you dont have
to change the scanning setting.
The Tx channel while scanning can be programmed per scanning
list. The talk back function allows you to transmit on the
channel detected after scanning resumes after a preset time,
prior to the Tx channel setting. The nuisance delete function
temporarily deletes a busy channel from the scanning list.
Backlight at stop scan automatically turns on the LCD backlight
when the scan stops.
56(W)×97(H)×36.4(D) mm* compact body with durable,
dependable construction, has been tested to MIL standard specifications.
* 27/32(W)×313/16(H)×17/16(D) in
The large capacity 1700mAh Lithium-Ion (Li-Ion) battery pack,
BP-227 provides a practical 910 hours* of operating
* Typical operation Tx::Rx:Stand-by=5:5:90
128 memory channels with 8 zones
Inversion type*1 voice scrambler built-in
Optional VOX headsets available
Optional GPS speaker-microphone
Power ON password
8 DTMF autodial
Normal and priority scans
2-step power saver and 2-step low battery beep
BIIS 1200 mode programmable
Busy, repeater lockout functions
BTL only version (no vibration alert and no voice recorder).
*1 Inversion type voice scrambler is not compatible with UT-109/UT-110
UT-109/UT-110 cannot be physically installed into the IC-F60V.
radio comes in two different frequency ranges:
state what range you need when you buy.
radio needs to be programmed with a special cable and software.
We can get them programmed for you for $25 (up to 16 Channels)
or $50 (up to 128 channels) extra per radio. All we need is
a note with the frequencies and CTCSS or DTCS tone codes to
be programmed per channel.
the items we sell are absolutely new - not refurbished or
display units... in the original box... never opened... with
one year manufacturer warranty in the USA.
payment details and return policy
We ship to:
Priority Mail® International
delivery 4-10 days
|| Service Transit
Express Mail® International
delivery 3-5 days
*We are not responsible for service transit time. Transit times are
provided by the carrier, exclude weekends and holidays, and may vary
with package origin and destination, particularly during peak periods.
US $4.00 Optional
We accept Paypal (confirmed address account), Credit Cards (through
Paypal), Bank Wire Transfers, cashier checks or money orders.
You do NOT need to be a PayPal Customer nor have a PayPal Account
to pay with your Credit/Debit Card in our website.
After clicking the "Add to Cart"
button, click on the "Don't have a PayPal account?" link
as indicated below.
You will be prompted to enter the Shipping Address and your Credit
We are not responsible for losses or damages in transit.
All sales are final. No
Sales tax charged for items shipped to Florida - U.S.A. (7.000%).
All the equipments we sell are absolutely new - not refurbished
or display units... in the box... never opened... with one year
are always happy to provide our customers with additional information
regarding our items.
Please email us with your request. Your emails will be answered
Your satisfaction is imperative. If you are unhappy with any aspect
of a transaction, please let us know.
Please click here to CONTACT
to help anyway possible.
Our job isn't done until you are completely satisfied.
If you have any questions concerning this item, please CONTACT
with your questions.
Commitment To Your Privacy
Your privacy is important to us. To better protect your privacy
the following notice explains the information we collect, how it
is used, how it is safeguarded, and how to CONTACT
if you have any concerns.
Information Is Collected:
As part of the order process, the following information is collected
Name, Shipping/Billing Address, Email address, Phone number
That Information Is Used:
All the information we collect is used only for order prosessing.
Commitment To The Security of Your Data:
All the information that you provide us is confidential. We do not
sell, trade or rent your personal information, including email addresses,
you have any question please CONTACT
Payment methods accepted
||Money order/ Cashiers check/ Bank
© 2006 Dan & Dave Engineering, Corp. All Rights Reserved.