FT-8900R 29/50/144/430 Mobile FM Transceiver
is a ruggedly-built, high quality Quad Band FM transceiver
providing 50 Watts of power output on the 29/50/144
MHz Amateur bands, and 35 Watts on the 430 MHz band.
It includes leading-edge features like cross-band
repeat, dual receive, VHF-UHF Full Duplex capability,
and over 800 memory channels. And its 10-meter FM
coverage brings the possibility of world-wide FM DX-ing
to you on your drive in to work!
Remote-Head Mounting Capability
Having trouble mounting your mobile radio in your compact
car? With the FT-8900R and its Free YSK-8900 Separation
Kit included, mounting is a breeze even in the tightest
locations. The YSK-8900 includes a 20 (6 m) remote cable
and a mounting bracket for the front panel, and the microphone
jack is located on the side of the front panel, eliminating
the need to run a separate cable.
Convenient Access to WIRES and other Internet-linking Systems
When six and ten meters are dead, you can still talk around
the world with the FT-8900R! The front panel provides easy
access to any WIRES (Wide-coverage Internet Repeater
Enhancement System) repeater, automatically sending the required
single DTMF access code at the beginning of each transmission.
And if youre using another Internet linking system,
one that requires a DTMF string to being up the link, you
can easily configure the FT-8900R to store and send the required
tone sequence, as well!
Quad Band Operation
The FT-8900R combines the traditional 144/430
MHz local-communications concept with the exciting capability
for Sporadic-E or F2 DX on the 29 MHz and 50 MHz bands, for
nationwide or worldwide FM communications from your car! The
first Amateur Radio FM mobile transceiver providing this capability,
the FT-8900R will make you wonder how you got by with a two-band
transceiver up to now!
Wide Frequency Coverage
The FT-8900R provides extended receiver coverage beyond the
Amateur bands, so you can keep informed of communication activities
in the public safety, commercial, aircraft, and government
communications ranges. Included is coverage of 28-29.7 MHz,
50-54 MHz, 108-180 MHz, 300-480 MHz, and 700-985 MHz (cellular
frequencies are blocked and non-restorable).
High Power Output
To get your message through when it counts, the FT-8900R puts
out a full 50 Watts of power on the 29/50/144 MHz bands, and
35 Watts on 430 MHz. To ensure thermal stability during long
transmissions, a thermal sensor monitors heat sink temperature,
engaging the rear panels cooling fan only when needed.
Over 800 Memory Channels
The FT-8900R provides a wide variety of memory resources,
including 799 regular memories, six Home
channels for favorite frequencies, five sets of band-edge
memories, and six Hyper Memory memories, which
store complete transceiver operating status, for maximum operating
efficiency and convenience. Six-character Alpha-Numeric Tags
(labels) may be appended to memory channels, affording instant
channel identification. No transceiver can compare with the
memory capability of the FT-8900R!
Cross-Band Repeat Capability
For emergency work, or to extend the range of a hand-held
unit, the FT-8900R includes Cross-Band Repeat capability,
similar to that pioneered on our popular FT-8100R Dual Band
To save valuable time while operating a transceiver with the
versatility of the FT-8900R, the Hyper Memory
feature allows you to store a complete set of configuration
data for the two bands on which youre operating. Besides
the usual storage of frequency and tone data, Hyper Memory
will store such setup parameters as Automatic Repeater Shift
status, Packet parameters, Scanning mode, and VFO tracking,
avoiding the need to change each of these functions manually
on a regular basis.
CTCSS and DCS Encoders Built In
Providing excellent performance even under difficult link
conditions, Yaesus 50-tone sub-audible CTCSS and 104-tone
DCS signaling systems ensure that you have full access to
repeater and remote-base inputs, and the built-in CTCSS/DCS
decoders allow silent listening on busy channels. Plus you
get Tone Search Scanning, which will scan for the tone being
received on an incoming signal, allowing you to match tones
quickly when operating on a new repeater system
Easy Setup for FM Satellite Operation
For operating on FM satellites like UO-14, the versatile memory
system of the FT-8900R allows you to store a set of uplink
and downlink frequencies that account for Doppler shift over
the entire horizon-to-horizon pass, allowing you to select
the optimum uplink/downlink combination effortlessly!
Truly Independent Two-Channel Operation
Basically operating as two radios in one, the FT-8900R may
be configured in a number of ways. For example, you can set
up the "left" side of the rig for operation on 29,
50, 144, or 430 MHz operation, while setting the "right"
side either to 144 MHz or 430 MHz. And, if you like, you can
configure the FT-8900R for 144-144 MHz or 430-430 MHz Dual
Receive operation, so you'll never miss out on the action!
The left and right sides have their own Volume and Squelch
controls, as well as S-Meters, so your operating preferences
are never compromised.
YSK-8900 separation kit included
payment details and return policy
We ship to:
Priority Mail® International
delivery 4-10 days
|| Service Transit
Express Mail® International
delivery 3-5 days
*We are not responsible for service transit time. Transit times are
provided by the carrier, exclude weekends and holidays, and may vary
with package origin and destination, particularly during peak periods.
US $4.00 Optional
We accept Paypal (confirmed address account), Credit Cards (through
Paypal), Bank Wire Transfers, cashier checks or money orders.
You do NOT need to be a PayPal Customer nor have a PayPal Account
to pay with your Credit/Debit Card in our website.
After clicking the "Add to Cart"
button, click on the "Don't have a PayPal account?" link
as indicated below.
You will be prompted to enter the Shipping Address and your Credit
We are not responsible for losses or damages in transit.
All sales are final. No
Sales tax charged for items shipped to Florida - U.S.A. (7.000%).
All the equipments we sell are absolutely new - not refurbished
or display units... in the box... never opened... with one year
are always happy to provide our customers with additional information
regarding our items.
Please email us with your request. Your emails will be answered
Your satisfaction is imperative. If you are unhappy with any aspect
of a transaction, please let us know.
Please click here to CONTACT
to help anyway possible.
Our job isn't done until you are completely satisfied.
If you have any questions concerning this item, please CONTACT
with your questions.
Commitment To Your Privacy
Your privacy is important to us. To better protect your privacy
the following notice explains the information we collect, how it
is used, how it is safeguarded, and how to CONTACT
if you have any concerns.
Information Is Collected:
As part of the order process, the following information is collected
Name, Shipping/Billing Address, Email address, Phone number
That Information Is Used:
All the information we collect is used only for order prosessing.
Commitment To The Security of Your Data:
All the information that you provide us is confidential. We do not
sell, trade or rent your personal information, including email addresses,
you have any question please CONTACT
Payment methods accepted
||Money order/ Cashiers check/ Bank
© 2006 Dan & Dave Engineering, Corp. All Rights Reserved.